9FQ Series Feed Crusher Technical Parameters
| 型号/指标/项目 Model/index/item |
实验物料 Material tested |
台时产量Output kg | 吨料电耗 Ton power consumption |
配用动力 Power equipped KW |
筛孔Screen hole ø |
| 9FQ50-50 | 玉米Core | 3000-350 | 18.5 | 22-30 | 2.5 |
| 9FQ50-40 | 玉米Core | 1500-2000 | 19.27 | 18.5-22 | 2.5 |
| 9FQ60 | 花生秧 Peanut plant |
800 | 8.8 | 13-15 | 2.5 |
| 9FQ50 | 玉米Core | 800-1200 | 8.7 | 7.5-11 | 2.5 |
| 9FQ420 | 花生秧 Peanut plant |
400 | 6.6 | 7.5-11 | 2.5 |
| 9FQ40 | 玉米Core | 500-800 | 4.5 | 5.5-7.5 | 2.5 |
| 9FQ320 | 花生秧 Peanut plant |
300 | 2.1 | 5.5-7.5 | 2.5 |
使用本机注意事项：
1、粉碎机应固定在钢制或木制磨架上；
2、使用三通出料口，两个袋子不得短于5米；
3、被粉碎的物料应清除夹杂的石块、铁块；
4、料物堵塞时严禁用手和铁棒拔料；
5、更换锤片用称称好，四组锤牌平衡好；
6、挂皮带前注意旋转方向，严禁反转；
7、工作前向两轴承加油，不准超负荷工作；
8、红色均为警告标志，均勿靠近伸手。
Points for Attention of Using the Machine:
1、The crusher shall be fastened on the steel or wood
2、Use three-way discharging hole, 2 bags shall not be less than 5 m;
3、The materials crushed shall be cleaned from stones and iron blocks;
4、It’s strictly prohibited to touch the machine with hand or use steel iron to touch.
5、Weigh the hammer piece with scale, and properly balance the four groups of hammer of the scale
6、Pay attention to the rotation direction before installing the strap and reverse is prohibited;
7、Refill lubricant oil into both bearings before working, it’s allowed to work overload;
8、All red marks are warnings, please don’t touch with hand.
Auxiliary strap wheel
| 型号 Model |
四级电机 Four anode motor |
柴油机 Diesel oil mahcine |
| 50-50 | 280 | 220 |
| 50-40 | 280 | 220 |
| 60 | 300 | 240 |
| 420 | 320 | 280 |
| 320 | 300 | 240 |
