高功率半导体激光器
高功率半导体激光器
High Power Diode Laser Systems DioLas
(DioLas DD50-2 with diode module DioMod–808-50-600-Pi and heat sink HS 120)
DioLas-Systems consist of:
The combined high power laser driver and TEC controller of A.L.S. – a high performance driver for high power diode laser modules, optimized for the best performance in industrial applications and for the use in research and development laboratories. It delivers an output current up to 50 A and a voltage up to 3 or 6 V and is designed for cw and pulsed operation with a rise time of 100 µs. It already includes the thermo-electrical temperature controller for active temperature stabilization and regulation of the used diode laser module.
The air forced high power laser diode heat sink of A.L.S., designed for heat loads up to 120, 80, 60 or 40 Watt (depending from the needed heat load for the used diode laser module). The heat sink includes the metal block, a temperature sensor, the Peltier cooling element (TEC) and a fan for the heat dissipation.
The diode laser module. For most of the pigtailed modules a visible (red) pilot (aiming) diode laser can be included in the diode laser module.
Features
laser diode modules with output power up to 50 W for the fiber coupled versions
laser diode modules with currents up to 50 A
microprocessor controlled
temperature controlled
different cases and housings possible
fiber coupled systems with low diameter and low NA (0.22) fibers
(Core diameter 100 µm, 200 µm, 400 µm, 600 µm, 800 µm, …)
user-friendly and reliable systems
Applications
material processing and micro material processing,
stabilized pump sources for diode pumped solid state lasers or fiber lasers
sources for illumination and lightning
research and development
OEM versions for test systems for laser diode module parameters (lifetime, burn in)
Two different systems are available:
30 W cw/pulsed Systems (prepared for fiber coupling 400 µm, 600 µm, …)
@ 808 nm
@ 940 nm
@ 980 nm
50 W cw/pulsed Systems (prepared for fiber coupling 400 µm, 600 µm, …)
@ 808 nm
@ 940 nm
@ 980 nm
The high power laser diode system will be assembled and measured out corresponding to the special application of the customer. Of course the customer can buy also the driver and the needed laser diode heat sink and use his own diode laser module to assemble his own system.
【激光系列产品】
光纤激光器 多模泵浦激光器 激光二极管未封装bar 激光二极管冷却装置 激光器电源 氦氖激光器 CO2激光器 半导体泵浦激光器 氩离子激光器 氦镉激光器 氮分子激光器 皮秒激光器 激光二极管电源 激光光谱测量 激光能量计/功率计 激光雕刻、打标、切割机 激光二极管模块 深紫外、紫外固体激光器 信号发生器 超快飞秒激光器 热电制冷产品 激光光束定位系统 激光光束分析仪 视频显微镜测量系统 激光准直器 多通道激光功率计 半导体激光器 激光测距仪 红外激光显示卡 调Q激光器 激光护目镜 光学平台 光学调整架 光学微调架 可调嵌入式光学调整架 倾斜位移台 通用调整台 光学延迟线 手动位移台 XY位移台 光学旋转台 角位移调整台 激光器附件 可变光阑 扩束镜 拉曼激光器 大功率光纤耦合激光器
