| 品名：铜基喷焊合金粉末 Copper-base sprayed welding alloy powder | 产地：河北 | 含量≥：20-99（%） |
| 粒度：-150+300（目） | 牌号：雷公 | 包装规格：10公斤 |
| 形状：颗粒状 | 制作方法：雾化法 |
铜基喷焊合金粉末 Copper-base sprayed welding alloy powder
铜基喷焊合金，是在铜基体中加入B、Si、Ni、Mn、Al、Fe、P等合金元素制成的，具有良好的导热，导电性和耐蚀性，摩擦系数低，耐粘着摩擦磨损性能优良，易切削，光洁度高。但由于应用面不宽所以铜基粉末品种比较少，下面介绍我公司生产的铜合金粉，建议用户在使用前应在120℃保温两小时低温炉内烘烤后使用为宜。
Copper-base sprayed welding alloy is produced by adding B, Si, Ni, Mn, Al, Fe and P into the copper base, which has sound heat conduction or electricity conduction performance, being antirust, with low frictional coefficient and sound adhesive friction wear resistance, easy for cutting and being smooth. For the limited applications, the copper-base alloy powder has comparatively fewer types. The following copper-base alloy powder should be dried in the low-temperature stove under 120℃ for two hours before useing.
Copper-base sprayed welding alloy is produced by adding B, Si, Ni, Mn, Al, Fe and P into the copper base, which has sound heat conduction or electricity conduction performance, being antirust, with low frictional coefficient and sound adhesive friction wear resistance, easy for cutting and being smooth. For the limited applications, the copper-base alloy powder has comparatively fewer types. The following copper-base alloy powder should be dried in the low-temperature stove under 120℃ for two hours before useing.
| 型号 | 规格(μm) | 特性简述 | 主要用途 | 物理性能 | 应用工艺 |
| Tuc1 | -106/+45 -150/+53 |
而腐蚀、耐磨、收缩系数小撞击时无火花具有低的摩擦系数和高的减摩性能。 | 低压阀门密封面以及耐磨金属间粘着摩擦磨损减摩焊层 | ①HRC12-18 ②熔点850℃-900℃ ③流动性17s/50g ④松装密度4.4g/cm3 |
氧乙炔喷焊 等离子堆焊 亦可用于氧乙炔等离子喷涂 |
| Tuc2 | -106/+45 -150/+53 |
具有良好的耐腐蚀，耐磨性，能和焊接性能无铁磁性冲击时不产生火花。 |
应用铸铁，铜合金基体耐磨减摩焊层。 |
①HB180-240 |
氧乙炔喷焊、喷涂 等离子堆焊、喷涂 |
| Tuc3 | -106/+45 -150/+53 |
具有低的摩擦系数和高的减磨性能，强度和韧性好，耐低温。 | 低压阀门密封面以及机床导轨轴套等。 | ①HB180-210 ②熔点900℃ ③流动性18s/50g ④松装密度4.4g/cm3 |
同上 |
| Tuc4 | -106/+45 | TCu4是铜。铝合金，比其它青铜有更高的力学性能，加入少量Fe能细化晶粒延缓再结晶的过程显著提高强度、硬度和耐磨性。 |
适用各种青铜工件的涂层，如水泵叶轮，活塞，衬套等。 |
①Rb82 |
氧 |
