| PPS BR-4-230BL 菲利浦石油国际有限公司 物性数据 |
| 暂无此原料描述部分┄ |
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |||||||||
| 基本性能 | 密度 | --- | ASTM D-792 | 1.65 | g/10min | ||||||||
| 吸水率 | --- | ASTM D-570 | 0.05 | % | |||||||||
| 物理性能 | 颜色 | --- | --- | Black | --- | ||||||||
| 机械性能 | 抗拉强度 | --- | ASTM D-638 | 23.0 | Ksi | ||||||||
| 伸长率 | --- | ASTM D-638 | 1.2 | % | |||||||||
| 抗折强度 | --- | ASTM D-790 | 30.0 | Ksi | |||||||||
| 抗拉模数 | --- | ASTM D-790 | 2.1 | Msi | |||||||||
| 抗压强度 | --- | ASTM D-695 | 35.0 | Ksi | |||||||||
|
--- |
|
|
|
|||||||||
| 电气性能 | 绝缘破坏电压 | --- | ASTM D-149 | 500 | V/mil | ||||||||
| 介电常质数 | 1KHz | ASTM D-150 | 4.0 | --- | |||||||||
| 介电常质数 | 1MHz | ASTM D-149 | 3.9 | --- | |||||||||
| 捐耗因素 | 1KHz | ASTM D-150 | 0.002 | --- | |||||||||
| 损耗因素 | 1MHz | ASTM D-150 | 0.003 | --- | |||||||||
| 体积电阻率 | --- | ASTM D-257 | 2×1015 | Ω.cm | |||||||||
| 耐电弧 | --- | ASTM D-495 | 125 | Sec | |||||||||
| 绝缘电阻 | 90℃,48hrs | --- | 1×1011 | Ω | |||||||||
| 电弧踪迹 | --- | UL 746A | 14.0 | in/min | |||||||||
| CTI踪迹 | --- | UL 746A | 175 | V | |||||||||
| 热 性 能 | 燃烧性 | --- | UL 94 | V-0/5VA | --- | ||||||||
| 热变形温度 | --- | ASTM D-648 | >500 | °F | |||||||||
| UL温度指数 | --- | UL | 200/220 | ℃ | |||||||||
